Folder Gluer Conveyor Belt
automatic folder gluing machine

The conveyor belt of the box gluer is an important part of the equipment, responsible for smoothly and accurately conveying the cardboard to each processing link (such as folding, gluing, pressing, etc.). The running state of the conveyor belt directly affects the production efficiency and product quality of the box gluer. The following is the relevant content about the conveyor belt of the box gluer:
Function of the conveyor belt
Cardboard conveying: conveying the cardboard from the feed end to the discharge end.
Positioning and alignment: ensure that the cardboard is accurately positioned during the conveying process to facilitate subsequent processing.
Synchronous operation: work synchronously with gluing, folding, pressing and other devices to ensure production continuity.
Adapt to a variety of cardboards: can handle cardboards of different thicknesses, sizes and materials.
Types of conveyor belts
Flat belt:
Suitable for conveying ordinary paper boxes.
Features are smooth operation and low noise.
Toothed belt:
Suitable for paper boxes that require precise positioning.
Features are anti-slip and good synchronization.
Mesh belt:
Suitable for occasions where ventilation or chip removal is required.
Features are good air permeability and easy cleaning.
Chain conveyor belt:
Suitable for heavy cardboard or special-shaped cartons.
Features strong load-bearing capacity and durability.
Common problems and solutions
- Conveyor belt deviation
Possible causes:
Uneven installation of conveyor belt.
Unbalanced roller or roller.
Uneven placement of cardboard.
Solution:
Re-adjust the installation position of conveyor belt.
Check and adjust the balance of roller or roller.
Make sure cardboard is evenly placed.
- Conveyor belt slips
Possible causes:
Insufficient tension of conveyor belt.
Worn or dirty roller surface.
Cardboard is too heavy or lacks friction.
Solution:
Adjust the tension of conveyor belt.
Clean or replace roller.
Increase the friction of conveyor belt (such as using anti-slip coating).
- Conveyor belt wear
Possible causes:
Aging due to long-term use.
Too many burrs on the edge of cardboard.
Excessive friction between conveyor belt and roller.
Solution:
Regularly check and replace aged conveyor belts.
Trim the edges of the cardboard and remove burrs.
Adjust the contact pressure between the conveyor belt and the roller.
- The conveyor belt is too noisy
Possible causes:
The conveyor belt tension is too high.
The roller bearing is damaged.
The conveyor belt is rubbing against the frame.
Solution:
Adjust the conveyor belt tension to the appropriate state.
Replace the damaged bearing.
Check and adjust the gap between the conveyor belt and the frame.
- The conveyor belt speed is unstable
Possible causes:
Motor or drive failure.
Improper setting of control system parameters.
There are foreign objects blocking the conveyor belt.
Solution:
Check the motor and drive, and repair or replace if necessary.
Adjust the control system parameters.
Clean up foreign objects on the conveyor belt.
Conveyor belt maintenance and care
Regular cleaning:
Clean up glue, paper scraps and other debris on the surface of the conveyor belt.
Use special cleaning agents to avoid corrosion of the conveyor belt.
Check the tension:
Check the tension of the conveyor belt regularly to ensure that it is in the right state.
Lubricate the roller:
Lubricate the roller bearing regularly to reduce friction and wear.
Check the wear:
Check the wear of the conveyor belt regularly and replace the aging or damaged conveyor belt in time.
Adjust the alignment:
Check the alignment of the conveyor belt regularly to prevent deviation.
Recommendations for conveyor belt selection
Choose according to the material of the cardboard:
Flat belts or toothed belts can be selected for ordinary cardboard.
Chain conveyor belts can be selected for heavy cardboard.
Choose according to production needs:
It is recommended to choose wear-resistant and non-slip conveyor belts for high-speed production.
It is recommended to choose toothed belts for high-precision production.
Choose according to the equipment model:
Ensure that the size and material of the conveyor belt match the box gluer.
By reasonably selecting, correctly using and regularly maintaining the conveyor belt, the working efficiency of the box gluer can be effectively improved, the service life of the equipment can be extended, and the product quality can be ensured. If you encounter complex problems, it is recommended to contact the equipment manufacturer or professional technicians for processing.